光照、温度对黑鲷(♀)×真鲷(♂)杂交子代受精卵孵化效果的影响

为了研究不同光照强度、温度对黑鲷(Acantho pagrusschlegelii)(♀)×真鲷(Pagrosomus major)(♂)杂交F1代受精卵孵化效果及仔鱼存活的影响,作者采用试验生态学的方法比较不同温度(16、18、20、22、24、26℃)下杂交鲷受精卵的孵化率、畸形率、孵化时间、7日龄仔鱼的存活率;比较不同光照强度下(10、100、300、800、1500、4 000、10 000 lx)受精卵孵化率、畸形率、孵化时间;比较不同光照强度下(200、1 000、2 000、5 000、10 000、15 000、20 000 lx)7日龄仔鱼的存活率。结果表明:在盐度为22条件下,受精卵最高孵化率(34.00%)和最低畸形率(16.65%)的孵化温度为20℃;在16～26℃范围内,温度与孵化时间呈负相关,与7日龄仔鱼存活率也呈负相关。不同的光照强度对受精卵孵化率和孵化时间的影响不显著,孵化率为65.88%～71.88%;但大于800lx的光照会令畸形率上升(大于15.21%);另外,5000～10000lx的光照强度更适宜仔鱼生存,7日龄仔鱼存活率达到38%～40.75%。黑鲷(♀)×真鲷(♂)杂交子代最佳孵化温度为20℃,最适光照强度为5 000～10 000 lx。     

Beaver dam analogues drive heterogeneous groundwater–surface water interactions

Beaver dam analogues (BDAs) are a cost-effective stream restoration approach that leverages the recognized environmental benefits of natural beaver dams on channel stability and local hydrology. Although natural beaver dams are known to exert considerable influence on the hydrologic conditions of a stream system by mediating geomorphic processes, nutrient cycling, and groundwater–surface water interactions, the impacts of beaver-derived restoration methods on groundwater–surface water exchange are poorly characterized. To address this deficit, we monitored hyporheic exchange fluxes and streambed porewater biogeochemistry across a sequence of BDAs installed along a central Wyoming stream during the summer of 2019. Streambed fluxes were quantified by heat tracing methods and vertical hydraulic gradients. Biogeochemical activity was evaluated using major ion porewater chemistry and principal component analysis. Vertical fluxes of approximately 1.0 m/day were observed around the BDAs, as was the development of spatially heterogeneous zones of nitrate production, groundwater upwelling, and anaerobic reduction. Strong contrasts in hyporheic zone processes were observed across BDAs of differing sizes. This suggests that structures may function with size-dependent behaviour, only altering groundwater–surface water interactions after a threshold hydraulic step height is exceeded. Patterns of hyporheic exchange and biogeochemical cycling around the studied BDAs resemble those around natural beaver dams, suggesting that BDAs may provide comparable benefits to channel complexity and near-stream function over a 1-year period.     

Fully coupled elastoplastic hydro-mechanical analysis of unsaturated porous media using a meshfree method

This paper presents the first application of an advanced meshfree method, ie, the edge-based smoothed point interpolation method (ESPIM), in simulation of the coupled hydro-mechanical behaviour of unsaturated porous media. In the proposed technique, the problem domain is spatially discretised using a triangular background mesh, and the polynomial point interpolation method combined with a simple node selection scheme is adopted for creating nodal shape functions. Smoothing domains are formed on top of the background mesh, and a constant smoothed strain, created by applying the smoothing operation over the smoothing domains, is assigned to each smoothing domain. The deformation and flow models are developed based on the equilibrium equation of the mixture, and linear momentum and mass balance equations of the fluid phases, respectively. The effective stress approach is followed to account for the coupling between the flow and deformation models. Further coupling among the phases is captured through a hysteretic soil water retention model that evolves with changes in void ratio. An advanced elastoplastic constitutive model within the context of the bounding surface plasticity theory is employed for predicting the nonlinear behaviour of soil skeleton. Time discretisation is performed by adopting a three-point discretisation method with growing time steps to avoid temporal instabilities. A modified Newton-Raphson framework is designed for dealing with nonlinearities of the discretised system of equations. The performance of the numerical model is examined through a number of numerical examples. The state-of-the-art computational scheme developed is useful for simulation of geotechnical engineering problems involving unsaturated soils.     

海洋表层沉积物中金属镉的来源解析

利用2015年8月份对长江口及其邻近海域表层沉积物的监测数据,基于主成分分析/绝对主成分分数(PCA/APCS)受体模型定量解析了重金属元素镉(Cd)的可能来源,并结合地统计学插值了Cd的源贡献量的空间分布状况,结果表明沉积物中镉污染主要存在3个可能来源,源头及贡献率分别为工业污染(18.8%)、陆地径流输入(66.0%)、生物活动等自然因素(13.6%),并且各个源头贡献量具有不同的空间分布状况,其中工业污染的高值区主要集中在靠近陆地区域,陆地径流输入的分布呈现由近岸向外海逐减降低的特征,生物活动等自然因素的高值区主要集中在远离陆地的外海区域。     

Local level rainfall and temperature variability in drought-prone districts of rural Sidama,central rift valley region of Ethiopia

ABSTRACT

The purpose of this study is to examine local level spatiotemporal rainfall and temperature variability in drought-prone districts of rural Sidama, Central Rift Valley region of Ethiopia. The study used 129 gridded monthly rainfall and temperature data of 32 years (1983–2014). The gridded rainfall and temperature records were encoded into GIS software and evaluated through different statistical and geospatial techniques. Mann-Kendal rank test and F distribution tests were used to test temporal and spatial statistical significance, respectively, of the data. The analysis revealed that Belg and Kiremt are the main rainfall seasons, constituting 81% of the annual rainfall. Although annual, Kiremt, and Belg rainfall amounts appear to have decreased over time, the decreasing trend is statistically significant only for Belg rainfall records. On the other hand, rainfall standard anomaly results indicated seven droughts of different magnitudes: one extreme, two severe, and four moderate. The study also revealed increasing temperature trends over the years under consideration that are statistically significant. The findings of this study on rainfall contradict other findings obtained around the study area. Thus, climate change adaptations need to focus on location-specific climate data analysis so that the intended adaptive interventions can be successful.     

新疆和田地区耕地面源污染生态风险评价

随着化肥、农膜等在农业生产中的过量投入，耕地面源污染的程度随之加重。文章选取塔里木河流域上游和田地区为研究区域，依据P-S-R框架理论，构建和田地区耕地面源污染生态风险评价指标体系，加入土壤理化数据，使用生态风险评价模型对和田地区1980 年及2016 年耕地面源污染状况进行生态风险评价，运用耕地生态风险模型、生态风险转移矩阵、Arcgis分析和田地区耕地面源污染时空分异状况。研究结论如下：和田地区1980 年耕地生态风险等级均为II级或III级，呈“中间高，两侧低”分布；2016 年耕地生态风险等级上升至IV级或V级，呈“倒W型”分布，各县耕地面源污染程度较1980 年均有较大幅度的上升，其中墨玉县和于田县在2016 年耕地生态风险等级达到最高的V级，而民丰县因自身生态环境的强脆弱性，同样需要提高关注。根据面源污染“从源头治理”的原则，应切实推进和田地区耕地生态环境保护与治理，提高政府重视程度，增强技术指导，开展试点工作，改善和田地区耕地面源污染现状。     

基于ROMS和4DVAR的沿轨与网格化SSH数据同化效果评价

Remote sensing products are significant in the data assimilation of an ocean model. Considering the resolution and space coverage of different remote sensing data, two types of sea surface height(SSH) product are employed in the assimilation, including the gridded products from AVISO and the original along-track observations used in the generation. To explore their impact on the assimilation results, an experiment focus on the South China Sea(SCS) is conducted based on the Regional Ocean Modeling System(ROMS) and the four-dimensional variational data assimilation(4 DVAR) technology. The comparison with EN4 data set and Argo profile indicates that, the along-track SSH assimilation result presents to be more accurate than the gridded SSH assimilation, because some noises may have been introduced in the merging process. Moreover, the mesoscale eddy detection capability of the assimilation results is analyzed by a vector geometry–based algorithm. It is verified that, the assimilation of the gridded SSH shows superiority in describing the eddy's characteristics, since the complete structure of the ocean surface has been reconstructed by the original data merging.     

轨道交通沿线土地溢价归公的政策与实践——以东莞市为例

轨道交通周边土地开发和溢价归公有助于缓解城市财政压力,推动公交都市建设。结合国外实施溢价归公的政策和实践模式,以东莞市为例,在资料收集、政策分析、文本和案例解读的基础上,探讨了中国城市政府在规划和建设轨道交通中,以土地溢价归公反哺轨道交通融资的政策安排和实施效果。结果表明：1）溢价归公的本质是以特定方式实现正外部效应的内部化,由于土地制度和税收体系的差异,欧美地区溢价归公主要依赖多样化的土地税收体系,而中国城市的实践主要借鉴了“轨道+物业”的联合开发模式;2）东莞市溢价归公策略的形成是综合开发规划编制和审批、沿线土地控制和储备、土地发展权转移、土地增值分配等核心环节有效协调的结果;3）东莞轨道交通沿线土地开发能形成可观的财政收益,潜在土地收益占轨道资金总需求的比例超过20%,但在实施过程中仍面临较大困难。东莞市案例能为其他城市轨道交通融资、土地开发和溢价归公的政策体系编制和有效实施提供一定的参考。     

Assessment of alternative adsorption models and global sensitivity analysis to characterize hexavalent chromium loss from soil to surface runoff

We investigate our ability to assess transfer of hexavalent chromium, Cr(VI), from the soil to surface runoff by considering the effect of coupling diverse adsorption models with a two‐layer solute transfer model. Our analyses are grounded on a set of two experiments associated with soils characterized by diverse particle size distributions. Our study is motivated by the observation that Cr(VI) is receiving much attention for the assessment of environmental risks due to its high solubility, mobility, and toxicological significance. Adsorption of Cr(VI) is considered to be at equilibrium in the mixing layer under our experimental conditions. Four adsorption models, that is, the Langmuir, Freundlich, Temkin, and linear models, constitute our set of alternative (competing) mathematical formulations. Experimental results reveal that the soil samples characterized by the finest grain sizes are associated with the highest release of Cr(VI) to runoff. We compare the relative abilities of the four models to interpret experimental results through maximum likelihood model calibration and four model identification criteria (i.e., the Akaike information criteria [AIC and AIC_C] and the Bayesian and Kashyap information criteria). Our study results enable us to rank the tested models on the basis of a set of posterior weights assigned to each of them. A classical variance‐based global sensitivity analysis is then performed to assess the relative importance of the uncertain parameters associated with each of the models considered, within subregions of the parameter space. In this context, the modelling strategy resulting from coupling the Langmuir isotherm with a two‐layer solute transfer model is then evaluated as the most skilful for the overall interpretation of both sets of experiments. Our results document that (a) the depth of the mixing layer is the most influential factor for all models tested, with the exception of the Freundlich isotherm, and (b) the total sensitivity of the adsorption parameters varies in time, with a trend to increase as time progresses for all of the models. These results suggest that adsorption has a significant effect on the uncertainty associated with the release of Cr(VI) from the soil to the surface runoff component.     

An evaluation of Guided Regularized Random Forest for classification and regression tasks in remote sensing

New Earth observation missions and technologies are delivering large amounts of data. Processing this data requires developing and evaluating novel dimensionality reduction approaches to identify the most informative features for classification and regression tasks. Here we present an exhaustive evaluation of Guided Regularized Random Forest (GRRF), a feature selection method based on Random Forest. GRRF does not require fixing a priori the number of features to be selected or setting a threshold of the feature importance. Moreover, the use of regularization ensures that features selected by GRRF are non-redundant and representative. Our experiments based on various kinds of remote sensing images, show that GRRF selected features provides similar results to those obtained when using all the available features. However, the comparison between GRRF and standard random forest features shows substantial differences: in classification, the mean overall accuracy increases by almost 6% and, in regression, the decrease in RMSE almost reaches 2%. These results demonstrate the potential of GRRF for remote sensing image classification and regression. Especially in the context of increasingly large geodatabases that challenge the application of traditional methods.